Smart Phone WIFI Controlled Thermostat - RT310i – Salus

£86.40 +VAT
Enquire Now

The RT310i is an affordable Smartphone controlled thermostat. It allows you to control your heating from anywhere via your Smartphone, Tablet or PC. Alternatively, it can be used locally as a simple to use up / down thermostat.

This thermostat is the ideal upgrade for electric or warm water UFH kits.  Its completely wireless nature removes the need to track the wall as it’s simply mounted in position without any impact on existing room décor. 

Your system can be controlled by a smart phone, tablet or pc and switches 16 amp via its receiver.

The RT310i is the perfect control for electric or warm water underfloor heating, electric heaters in a shop or office or indeed an oil or gas boiler and as it’s an RF stat little or no wiring is required. 


  • Switching volt free and 230V
  • Optional control via Smartphone, Tablet or PC
  • Easy to use App
  • Pre-paired wireless communication, so no more dip switches!
  • Wall or desk mounted thermostat
  • Choose to use schedule or control manually
  • Adjustable frost protection when the thermostat is off
  • Wireless communication test function
  • Suitable for heating or cooling applications
  • Holiday function
  • 16 amp relay switching
  • Manual override
  • 5 Year Warranty



2 x AA Batteries





230V RF

Switch Rating

16(5) Amp SPST


0 -230V



2 x AA Batteries

Ethernet cable included


Please follow the new procedure below:

The RT310i is factory pre-paired as standard. When you power up the receiver, the RED LED will flash.

To test that the receiver and thermostat are paired, navigate to the Pairing Menu by choosing Menu > Pairing > TEST. This will display ‘TESTING 10’ on the thermostat. If the receiver and thermostat are paired correctly, the RED and GREEN LED’s on the receiver will flash. To exit testmode, press and hold the Menu button for 3 seconds.

If the RED and GREEN LED’s on the receiver are NOT flashing, you will need to Re-Pair the Thermostat and Receiver. To do this, slide the ON/OFF switch on the receiver to OFF and then slide it back to ON. The RED LED will now flash. Now, enter the pairing process by choosing Menu > Pairing > PAIR. You will now see ‘PAIRING 10’ on the screen. When the RED LED’s stops flashing, the Thermostat and Receiver are paired.

You can test this again by following the above process.

This website was developed with support from Priority 6 (LEADER) of the Northern Ireland Rural Development Programme 2014-2020 by the Department of Agriculture, Environment and Rural Affairs and the European Agricultural Fund for Rural Development: Europe investing in rural areas